NSBR492WSG-0 Ext Image NSBR492WSG-0 Int Image
NSBR492WSG-0 Ext Image
NSBR492WSG-0 Int Image

49 cu. ft. Blood Bank Refrigerator, Glass Door, High Performance, FDA listed Class II medical device

Product Number: NSBR492WSG/0

AABB-SCPP-Seal-ColorNLS Natural Refrigerant Labelcapture (1) 

Corepoint™ Scientific Blood Bank Refrigerators are designed in accordance with FDA listed Class II medical devices. In addition, blood bank refrigerators also conform to the requirements set forth by AABB for the refrigerated cold storage of blood-based products. 

Backed by optimal temperature control and EPA SNAP compliant refrigerants, these high-performance units protect blood, prevent waste, and allow for peak delivery.  Corepoint™ Scientific blood bank refrigerators utilize smart controllers and feature a full array of alarms, LED interior lighting, stainless steel interiors, sliding drawers and probe access port. 
  • Double glass door Blood Bank refrigerator
  • Indoor use only, +18°C to +26°C (+65°F to +78°F), <70% RH
  • 49 cu. ft. gross volume, up to 832 blood bags with optional 8th drawer per door
  • Two swing glass doors, self-closing, stay position at 100° open, right and left hinged to open from the middle, non-reversible, magnetic sealed gasket, keyed lock
  • 7 drawers standard per door (14 drawers total) with option for 8th drawer per door (16 drawers total), 304 SS drawers, 65 lb. capacity each
  • 4 swivel casters, front casters locking
  • Shielded, switched LED lighting, full coverage, balanced spectrum
  • External probe access: Rear wall port (3/4") dia.
  • Cabinet is foamed-in-place with EPA compliant high density urethane foam
  • Exterior materials: White powder coated steel
  • Access control: Key lock
  • Refrigerant: EPA SNAP compliant, R600a, Isobutane
  • Two (2) years parts and labor warranty, excluding calibrations
  • Seven (7) years compressor warranty
  • Power plug: Hospital grade, NEMA 5-15, 9 ft nominal (2.7 m)
  • Agency listing: FDA listed Class II medical device, 21CFR part 820 compliant, ETL, CETL Listed (certified to UL471 standard, hydrocarbon refrigerant safety)
  • Product approved as AABB standards compliant for refrigerated blood products cold storage. See listing at aabb.org/standards-compliant.

External dimensions:

  • Width: 54”
  • Depth: 35 ¾”
  • Height: 81 ½”
  • Door swing: 25 ¼”
  • Product weight: 726 lbs. (14 drawers)
  • Shipping weight: 845 lbs. (14 drawers)
  • Rated amperage: 4.5 Amps
  • Controller technology: Proportional Integral Derivative (PID) microprocessor with LCD display
  • Battery backup: 24V high capacity battery, controller, all alarms active, temperature monitoring DAQ and event logging active on battery backup
  • Digital communication: RS-485 (MODBUS)
  • Temperature setpoint range: 1°C to 10°C
  • Display probe: Calibrated, stainless steel
  • External alarm connection: State switching remote alarm contacts
  • Alarms: Visual and audible indicators, Power failure, Temperature sensor failure, Battery voltage monitor and replacement, High / Low temperature, Door ajar
  • Simulator ballast: Upper probe: 4 oz. (120 ml) bottle, 50% glycerol mixture. Lower probe: Solid thermal media